However, in case of emergency, two 40W incandescent lamps can be placed on them to replace the main heating element. These sockets are powered together with the main heating element. We have also included two sockets for incandescent lamps, to be used as backup heating elements. One, 100W silicon heating cable, approximately 8 meters long & supplied with clips on wire ends, was selected as the main heating source. In our experiments, humidity was adjusted within 60%-90% RH, using two, and separate water pans. Within the incubator cabinet, the temperature is kept at 37.6☌. Walls made from plywood and were covered inside and outside with acrylic paint. The dimension of incubator cabinet is 50×50×50cm. Our incubator was designed to incubate 42 eggs each time. The last part is the device used for automatic egg turning.
The second part is the electronic equipment used to measure and control temperature and humidity. The enclosure must have good physical properties, to ensure good thermal isolation between the interior room of the incubator and the external environment. An automatic incubator turns eggs automatically, usually by slowly rocking them backward and forwards continuously.īuilding an automatic incubator consists of three main parts. Hatching eggs need to be kept at the right temperature and humidity, as well as need to be turned at regular intervals to stop the developing embryos from sticking to the inside of the shell.
#Round incubator egg turner how to#
Tutorial on how to build an Automatic Egg Incubator by George Adamidis is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 3.0 Unported License.Īn incubator is an enclosure having controlled temperature, humidity, and ventilation.
With some minor modifications, the proposed automatic egg incubator can be also used for other commonly incubated poultry and game bird species. We hope that this article will help you to build your own Egg Incubator, to incubate and brood small numbers of chicks.
0 kommentar(er)
